#17: Comments: Fewer automated checks on the data were done for this test. I edited this report using Olga's notes. -Tom During e2e-2 test we got 131 segments of data: 32 - science and IOC segments 45 - NO SLEW or non-maneuver observations 16 - gyro calibrations segments 25 - cover eject segments 13 - Constraint Violations segments #17.01 problem: Most NOSLEW IRS segments are missing commanded stim flash. obsid: 2d184f04 2d185f04 2d190704 2d190f04 2d191f04 2d192704 2d192f04 2d193f04 2d1a3f04 2d1a4f04 2d1a5f04 2d1b0704 2d1b0f04 2d1b1f04 2d1b2704 2d1b2f04 2d1b3f04 2e1a1f04 2e1a2f04 2e1a3f04 2e1a4f04 2e1a5f04 2e1b0f04 2e194f04 2e195f04 #17.02 problem: All NOSLEW SAA segments have LONG DITHER ~ 31 seconds. Most of these have SLIPPED FRAMES from the previous segments. Proven cases of SLIPPED Frames are listed below. obsid: 2d1a4704 2d1b0f04 #17.03 problem: Long dithers. obsid: 2d1d2900 (survey_ocs, 20s) 2dae0100 (survey_s, 40s) #17.04 problem: Two long dithers and two stim flashes. obsid: 2d1d5800 (survey-lmc, about 300s) 2dae0900 (survey-s, 71s and 411s) 2d1e6802 (survey-lam, 147s and 427s) #17.05 problem: No stim flash. obsid: 2d1e3701 (gyrocal) 2e1b5f03 2e1c5f03 2e1d3703 2e1d5f03 (cover-eject) 2e1f1802 (constraint violation) #17.06 problem: Segment following a long dither has a slipped frame. obsid: 2d1e3f01 (gyrocal) 2d1c0503 2e1d0503 (cover-eject) #17.07 problem: "following segment has Long Dither" obsid: 2e1d0503 2e1d3d03 2e1e0503 #17.08 problem: Time-gaps. obsid: (see note) note: NOSLEW time ~ 100 minutes between obsid 2d193f04 & 2d1a3f04, so we missed 11 segments -according to report. NIGHT BREAK(?) ~ 14 hours between gyrocal and NOSLEW data. NOSLEW time again ~ 154 minutes break (back in time and in OBS-IDs: 2d1b0f04-->2d194704, one science segment 2d1f1100 got between them.) COVER EJECT had two science segments 2dad6400,2dad6b00 which were inserted on wrong time and interrupted time flow. GYROCAL has time-gap ~ 8min between 2d1e4701 and 2d1e4f01 (this 2d1e4f01 segm has only three last frames taken)